Category Archives: BSD

OpenBSD 6.1 Officially Released

The OpenBSD developers have announced the availability of a new stable release of their security-oriented operating system. The new release, OpenBSD 6.1, introduces bug fixes, several new or improved hardware drivers and security enhancements to the system installer. “Installer improvements: The installer now uses privilege separation for fetching and verifying the install sets. Install sets are now fetched over an HTTPS connection by default when using a mirror that supports it. The installer now considers all of the DHCP information in file name, boot file-name, server-name, tftp-server-name, and next-server when attempting to do automatic installs or upgrades. The installer no longer adds a route to an alias IP via 127.0.0.1, due to improvements in the kernel routing components.

Release announcement and quick installer information

Detailed log of changes

Errata page (CVS branch)

Song – Winter of 95

Upgrade Guide: 6.0 to 6.1

OpenBSD/macppc 6.1Installation Notes

OpenBSD/x86_64 bit 6.1Installation Notes

OpenBSD/x86_32 bit 6.1Installation Notes

OpenBSD/alpha 6.1Installation Notes

OpenBSD/armv7 6.1Installation Notes

OpenBSD/landisk 6.1Installation Notes

OpenBSD/loongson 6.1Installation Notes

OpenBSD/hppa 6.1Installation Notes

OpenBSD/octeon 6.1Installation Notes

OpenBSD/sgi 6.1Installation Notes

OpenBSD/sparc64 6.1Installation Notes

OpenBSD/arm64 6.1Installation Notes

Packages

Quick install instructions

Note: OpenBSD is a project released under the BSD 2-Clause license.
This license is recognized as free license, but is not copyleft.

P.S.

Creating a bootable USB key using a Un*x-like system:

    Some older systems may not be able to boot from USB keys or require
    changing boot priority.  Check your BIOS settings if you run into
    problems.

    First, you will need to obtain a local copy of the bootable filesystem
    image miniroot59.fs or install59.fs as described above.
    You should use the signify(1) and sha256(1) commands to verify
    the integrity of the images with the SHA256.sig file on the mirror site.

    Next, use the dd(1) utility to copy the file to the USB storage device.
    The command would likely be, under OpenBSD:
        dd if=miniroot59.fs of=/dev/rsdNc bs=1m

    where N is the device number.  You can find the correct device number
    by checking dmesg(8) when inserting the media.

    If you are using another operating system, you may have to adapt
    this to conform to local naming conventions for the USB key and
    options suitable for copying to a "raw" disk image.  The key
    issue is that the device name used for the USB key *must* be one
    that refers to the correct block device, not a partition or
    compatibility mode, and the copy command needs to be compatible
    with the requirement that writes to a raw device must be in
    multiples of 512-byte blocks.  The variations are endless and
    beyond the scope of this document.

    If you're doing this on the system you intend to boot the USB key on,
    copying the image back to a file and doing a compare or checksum
    is a good way to verify that the USB key is readable and free of
    read/write errors.

Happy OpenBSD  😀

TrueOS 2017-02-22 Released – Rolling Release

trueos

Feb 24, 2017. TrueOS is a rolling release operating system based on FreeBSD. The TrueOS team has released a new snapshot of the operating system’s Desktop and Server editions. The new snapshot includes several bug fixes, a few new services and package updates. TrueOS 2017-02-22 also includes support for automounting devices and a new jail management utility: “Automounting – This new feature allows auto-detection and mounting of inserted USB devices. It also automatically unmounts USB devices when the user ceases accessing the device. See the blog post on automounting for more details about this useful new feature. New jail utilities jbootstrap (requires being run once to fetch base packages), jinit, and jdestroy are available. These support OpenRC development and add other functionality. See the blog post on these new jail utilities for more details.

Release announcement

Features

New Jail management utilities

New Automounting

TrueOS Pico

Sources

Handbook

Community

Download TrueOS-Desktop-2017-02-22-x64-DVD.iso

Download TrueOS-Desktop-2017-02-22-x64-USB.img

Download TrueOS-Server-2017-02-22-x64-DVD.iso

Download TrueOS-Server-2017-02-22-x64-USB.img

Creating a bootable USB key using a Un*x-like system:

    The command would likely be, under TrueOS/PCBSD:
        dd if=YourTrueOS.img of=/dev/da0 bs=1m 

where da0 is the device and number.  You can find the correct device number
    by checking dmesg(8) when inserting the media.

 

Happy TrueOS  😀

Merry Christmas 2016

merry_christmas

OpenBSD 6.0 Officially Released

openbsd_puffy60

The OpenBSD project has announced the release of OpenBSD 6.0. The OpenBSD project focuses on providing code and documentation that are correct and of high quality. This has lead to OpenBSD being regarded as a highly secure and reliable operating system. The new release features New/extended platforms: for armv7 – EFI bootloader added, kernels are now loaded from FFS instead of FAT or EXT filesystems, without U-Boot headers, a single kernel and ramdisk are now used for all SoCs, Miniroot installer images include U-Boot 2016.07 with support for EFI payloads, vax removed. Many new and improved hardware drivers and support for hardware-reduced ACPI implementations, for ACPI 5.0 implementations, initial support for MSI-X has been added, the xhci(4) driver now performs handoff from an xHCI-capable BIOS correctly, W^X is now strictly enforced by default etc.. Updated versions of LibreSSL and OpenSSH are included as well and feature several security enhancements.

Release announcement and quick installer information

Detailed log of changes

Errata page (CVS branch)

Song – Another Smash of the Stack

Song – Black Hat

Song – Money

Song – Comfortably Dumb (the misc song)

Song – Mother

Song – Goodbye

Upgrade Guide: 5.9 to 6.0

openbsd_banner

Download and install:

OpenBSD/macppc 6.0Installation Notes

OpenBSD/x86_64 bit 6.0Installation Notes

OpenBSD/x86_32 bit 6.0Installation Notes

OpenBSD/alpha 6.0Installation Notes

OpenBSD/armv7 6.0Installation Notes

OpenBSD/landisk 6.0Installation Notes

OpenBSD/loongson 6.0Installation Notes

OpenBSD/luna88k 6.0Installation Notes

OpenBSD/hppa 6.0Installation Notes

OpenBSD/octeon 6.0Installation Notes

OpenBSD/sgi 6.0Installation Notes

OpenBSD/sparc64 6.0Installation Notes

OpenBSD/zaurus 6.0Installation Notes

Quick install instructions

openbsd_blackhat

Note: OpenBSD is a project released under the BSD 2-Clause license.
This license is recognized as free license, but is not copyleft.

P.S.

Creating a bootable USB key using a Un*x-like system:

    Some older systems may not be able to boot from USB keys or require
    changing boot priority.  Check your BIOS settings if you run into
    problems.

    First, you will need to obtain a local copy of the bootable filesystem
    image miniroot59.fs or install59.fs as described above.
    You should use the signify(1) and sha256(1) commands to verify
    the integrity of the images with the SHA256.sig file on the mirror site.

    Next, use the dd(1) utility to copy the file to the USB storage device.
    The command would likely be, under OpenBSD:
        dd if=miniroot59.fs of=/dev/rsdNc bs=1m

    where N is the device number.  You can find the correct device number
    by checking dmesg(8) when inserting the media.

    If you are using another operating system, you may have to adapt
    this to conform to local naming conventions for the USB key and
    options suitable for copying to a "raw" disk image.  The key
    issue is that the device name used for the USB key *must* be one
    that refers to the correct block device, not a partition or
    compatibility mode, and the copy command needs to be compatible
    with the requirement that writes to a raw device must be in
    multiples of 512-byte blocks.  The variations are endless and
    beyond the scope of this document.

    If you're doing this on the system you intend to boot the USB key on,
    copying the image back to a file and doing a compare or checksum
    is a good way to verify that the USB key is readable and free of
    read/write errors.

Happy OpenBSD  😀

PC-BSD 10.3 – TrueOS Server 10.3 – The new release from 10.x branch

 

Pc-bsd-logo

Kris Moore has announced the launch of a new stable PC-BSD release. The project’s latest version, PC-BSD 10.3, is intended to be the final release in the project’s 10.x branch and is based on FreeBSD 10.3. PC-BSD 10.3 uses the FreeBSD boot loader with GRUB offered as an optional alternative. UEFI support has been improved in the system installer and the operating system ships with Lumina 0.8.8 as one of the available desktop environments. “The PC-BSD team is pleased to announce the availability of 10.3-RELEASE! This is currently planned to be the last maintenance release in the 10.X series, and we are currently working hard on the upcoming 11.0. A very special thanks to all the developers, QA, translation and documentation teams for helping to make this release possible.” PC-BSD is available in two editions, the desktop edition and the TrueOS edition for servers.

Release Announcement

Documentation

Community

Development

Support

 

PCBSD_ORG_10_0_Banner

PC-BSD Desktop 10.3 DVD

PC-BSD Desktop 10.3 USB

PC-BSD Desktop 10.3 NetInstall

TrueOS Server 10.3 DVD

TrueOS Server 10.3 USB

TrueOS Server 10.3 NetInstall

 

Happy PC-BSD/TrueOS  😀

FreeBSD 10.3 – The third release of the stable/10 branch

freebsd

The FreeBSD Release Engineering Team is pleased to announce the availability of FreeBSD 10.3-RELEASE. This is the third release of the stable/10 branch, which improves on the stability of FreeBSD 10.2-RELEASE and introduces some new features. Some of the highlights: The UEFI boot loader received several improvements: It now follows /boot/config and /boot.config files, multi-device boot support works and command line arguments are parsed. Additionally, its framebuffer driver has been enhanced with GOP (Graphics Output Protocol) and UGA (Universal Graphics Adapter) handling, allowing to set the current graphics mode on systems using one of these methods. Moreover, ZFS boot capability has been added to the UEFI boot loader, including support for multiple ZFS Boot Environments (BEs), e. g. those provided by sysutils/beadm…

Release Announcement

Release Notes

Frequently Asked Questions

FreeBSD Handbook

Installation Instructions

Community

Hardware Notes

freebsd_doc

 

 

 

 

Download:

*The FreeBSD installer can be downloaded in a number of different formats including CD (disc1), DVD (dvd1), and Network Install (bootonly) sized ISO Disc Images, as well as regular and mini USB memory stick images. Later versions of FreeBSD are also offered as prebuilt expandable Virtual Machine images, and as SD Cards for embedded platforms.

FreeBSD/x86_64 bit 10.3

FreeBSD/x86 32 bit 10.3

FreeBSD/ia64 itanium 10.3

FreeBSD/powerpc 10.3

FreeBSD/powerpc64 10.3

FreeBSD/sparc64 10.3

FreeBSD/VMx86 32 bit 10.3

FreeBSD/VMx86 64 bit 10.3

FreeBSD/BeagleBone 10.3

FreeBSD/Cubox-HammingBoard 10.3

FreeBSD/Gumstix 10.3

FreeBSD/RaspberryPi-B 10.3

FreeBSD/PandaBoard 10.3

FreeBSD/WandBoard 10.3

freebsd_funny

Happy FreeBSD  😀

OpenBSD 5.9 – The new stable release

puffy59

The OpenBSD project has announced the release of OpenBSD 5.9. The OpenBSD project focuses on providing code and documentation that are correct and of high quality. This has lead to OpenBSD being regarded as a highly secure and reliable operating system. The new release features W^X (write or execute) security for 32-bit x86 processors, many new and improved hardware drivers and support for installing OpenBSD on GPT partitioned hard drives. This release features a forked version of the “less” command and network stack improvements. Updated versions of LibreSSL and OpenSSH are included as well and feature several security enhancements.

Release announcement and quick installer information

Detailed log of changes

Errata page (CVS branch)

Song – Doctor W^X

Song – Systemagic (Anniversary Edition)

Packages and Ports

 

openbsd_banner

Download and install:

OpenBSD/macppc 5.9Installation Notes

OpenBSD/x86_64 bit 5.9 — Installation Notes

OpenBSD/x86_32 bit 5.9Installation Notes

OpenBSD/armish 5.9Installation Notes

OpenBSD/alpha 5.9 — Installation Notes

OpenBSD/armv7 5.9Installation Notes

OpenBSD/landisk 5.9Installation Notes

OpenBSD/loongson 5.9 — Installation Notes

OpenBSD/luna88k 5.9Installation Notes

OpenBSD/hppa 5.9Installation Notes

OpenBSD/octeon 5.9 — Installation Notes

OpenBSD/sgi 5.9Installation Notes

OpenBSD/sparc 5.9Installation Notes

OpenBSD/sparc64 5.9 — Installation Notes

OpenBSD/zaurus 5.9Installation Notes

Quick install instructions

systemmagic_right

Note: OpenBSD is a project released under the BSD 2-Clause license.
This license is recognized as free license, but is not copyleft.

P.S.

Creating a bootable USB key using a Un*x-like system:

    Some older systems may not be able to boot from USB keys or require
    changing boot priority.  Check your BIOS settings if you run into
    problems.

    First, you will need to obtain a local copy of the bootable filesystem
    image miniroot59.fs or install59.fs as described above.
    You should use the signify(1) and sha256(1) commands to verify
    the integrity of the images with the SHA256.sig file on the mirror site.

    Next, use the dd(1) utility to copy the file to the USB storage device.
    The command would likely be, under OpenBSD:
        dd if=miniroot59.fs of=/dev/rsdNc bs=1m

    where N is the device number.  You can find the correct device number
    by checking dmesg(8) when inserting the media.

    If you are using another operating system, you may have to adapt
    this to conform to local naming conventions for the USB key and
    options suitable for copying to a "raw" disk image.  The key
    issue is that the device name used for the USB key *must* be one
    that refers to the correct block device, not a partition or
    compatibility mode, and the copy command needs to be compatible
    with the requirement that writes to a raw device must be in
    multiples of 512-byte blocks.  The variations are endless and
    beyond the scope of this document.

    If you're doing this on the system you intend to boot the USB key on,
    copying the image back to a file and doing a compare or checksum
    is a good way to verify that the USB key is readable and free of
    read/write errors.

Happy OpenBSD  😀

Introduction to NGINX – eBook for FREE

NGINX

Nginx is an open source HTTP and reverse proxy server, as well as a mail proxy server, load balancer, and HTTP cache. The nginx project started with a strong focus on high concurrency, high performance and low memory usage.
This ebook will introduce you to the magic of Nginx. You will learn to install and configure nginx for a variety of software platforms and how to integrate it with Apache. Additionally, you will get involved with more advanced concepts like Load Balancing, SSL configuration and Websockets proxying.
With this free eBook you will also receive weekly news, tips and special offers delivered to your inbox courtesy of System Code Geeks.

Get this eBook for FREE here!

Read the instructions and done. The time is limited, hurry up.

 

 

 

 

 

 

 

Happy Reading  😀

Dropbox – 500 MB Bonus Space for FREE

dropbox_space_for_free

Dropbox is a file hosting service operated by Dropbox, Inc., headquartered in San Francisco, California, that offers cloud storage, file synchronization, personal cloud, and client software. Dropbox allows users to create a special folder on their computers, which Dropbox then synchronizes so that it appears to be the same folder (with the same contents) regardless of which computer is used to view it. Files placed in this folder are also accessible via the Dropbox website and mobile apps.

Grab the 500 MB Bonus Space for FREE here !

Sign up a new account, install the application and receive 500 MB of space for FREE.

 

 

 

 

 

 

 

Compatible with:

logo_mac_win_tux_android

Happy Storage  😀

OpenBSD 5.8 released! Support for many architectures – The 20th anniversary of the source tree

openbsd_puffy58

In the 20th anniversary of the OpenBSD source tree, Theo de Raadt has announced the release of OpenBSD 5.8. The OpenBSD project focuses on providing code and documentation that are correct and of high quality. This has lead to OpenBSD being regarded as a highly secure and reliable operating system. The new release features several new or improved drivers, the sudo command has been replaced with doas and some of the system installer’s default settings have been changed. “We are pleased to announce the official release of OpenBSD 5.8. This is our 38th release on CD-ROM (and 39th via FTP/HTTP). We remain proud of OpenBSD’s record of twenty years with only two remote holes in the default install. As in our previous releases, 5.8 provides significant improvements, including new features, in nearly all areas of the system.

Detailed log of changes

Errata page (CVS branch)

Release announcement and quick installer information

Listen the new songs

 

open_bsd_banner

Download and install:

OpenBSD/macppc 5.8Installation Notes

OpenBSD/x86_64 bit 5.8Installation Notes

OpenBSD/x86_32 bit 5.8Installation Notes

OpenBSD/armish 5.8Installation Notes

OpenBSD/alpha 5.8Installation Notes

OpenBSD/armv7 5.8Installation Notes

OpenBSD/landisk 5.8Installation Notes

OpenBSD/loongson 5.8Installation Notes

OpenBSD/octeon 5.8Installation Notes

OpenBSD/sgi 5.8Installation Notes

OpenBSD/socppc 5.8Installation Notes

OpenBSD/sparc 5.8Installation Notes

OpenBSD/sparc64 5.8Installation Notes

OpenBSD/vax 5.8Installation Notes

OpenBSD/zaurusInstallation Notes

Quick install instructions

 

 

Note: OpenBSD is a project released under the BSD 2-Clause license.
This license is recognized as free license, but is not copyleft.

Happy OpenBSD  😀