Tag Archives: The BSD 2-Clause License

OpenBSD 6.2 Released!

The project has released OpenBSD 6.2 which features many new drivers, particularly for the ARM architecture, and network packet handling performance improvements. Some key features have been added to the system installer too, including checking for security updates on the system’s first boot: “Installer improvements: The installer now uses the Allotment Routing Table (ART). A unique kernel is now created by the installer to boot from after install/upgrade. On release installs of architectures supported by syspatch, “syspatch -c” is now added to rc.firsttime. Backwards compatibility code to support the ‘rtsol’ keyword in hostname.if(5) has been removed. The install.site and upgrade.site scripts are now executed at the end of the install/upgrade process. More detailed information is shown to identify disks. The IPv6 default router selection has been fixed. On the amd64 platform, AES-NI is used if present.

Release announcement and quick installer information

Detailed log of changes

Errata page (CVS branch)

Song – Coming in December

Upgrade Guide: 6.1 to 6.2

OpenBSD/macppc 6.2Installation Notes

OpenBSD/x86_64 bit 6.2Installation Notes

OpenBSD/x86_32 bit 6.2Installation Notes

OpenBSD/alpha 6.2Installation Notes

OpenBSD/armv7 6.2Installation Notes

OpenBSD/landisk 6.2Installation Notes

OpenBSD/loongson 6.2Installation Notes

OpenBSD/hppa 6.2Installation Notes

OpenBSD/octeon 6.2Installation Notes

OpenBSD/sgi 6.2Installation Notes

OpenBSD/sparc64 6.2Installation Notes

OpenBSD/arm64 6.2Installation Notes

Packages

Quick install instructions

Note: OpenBSD is a project released under the BSD 2-Clause license.
This license is recognized as free license, but is not copyleft.

P.S.

Creating a bootable USB key using a Un*x-like system:

    Some older systems may not be able to boot from USB keys or require
    changing boot priority.  Check your BIOS settings if you run into
    problems.

    First, you will need to obtain a local copy of the bootable filesystem
    image miniroot59.fs or install59.fs as described above.
    You should use the signify(1) and sha256(1) commands to verify
    the integrity of the images with the SHA256.sig file on the mirror site.

    Next, use the dd(1) utility to copy the file to the USB storage device.
    The command would likely be, under OpenBSD:
        dd if=miniroot59.fs of=/dev/rsdNc bs=1m

    where N is the device number.  You can find the correct device number
    by checking dmesg(8) when inserting the media.

    If you are using another operating system, you may have to adapt
    this to conform to local naming conventions for the USB key and
    options suitable for copying to a "raw" disk image.  The key
    issue is that the device name used for the USB key *must* be one
    that refers to the correct block device, not a partition or
    compatibility mode, and the copy command needs to be compatible
    with the requirement that writes to a raw device must be in
    multiples of 512-byte blocks.  The variations are endless and
    beyond the scope of this document.

    If you're doing this on the system you intend to boot the USB key on,
    copying the image back to a file and doing a compare or checksum
    is a good way to verify that the USB key is readable and free of
    read/write errors.

Happy OpenBSD  😀

 

Advertisements

OpenIndiana Hipster 2016.04 and illumos – OpenSolaris

OpenIndiana

22/04/2016 – The OpenIndiana project, which is a continuation of OpenSolaris, has released a new version of the community-maintained operating system. The new release offers a number of improvements to package management and includes several package updates to such desktop applications as Firefox, Thunderbird and VLC. “New nlipkg zone brand was introduced, which behaves like old ipkg brand (i.e. it doesn’t check child and parent images for consistency). It’s possible to convert ipkg zone to nlipkg one. To do so, install system/zones/brand/nlipkg, change zone’s brand to nlipkg and remove /var/pkg/linked inside zone. Closed sysidtool which could be used to set initial system parameters on first boot and initialize zone’s configuration was replaced with sysding. All other packages from closed admin incorporation were also removed…

 

ReleaseNotes

Packages

Hipster Branch

illumos project

Hardware Compatibility List:

Laptops and Netbooks

Servers

Components

How to Upgrade from OpenSolaris

How to Upgrade OpenIndiana

How to Install OpenIndiana

illumos HLb

Mailing Lists

Frequently Asked Questions

OpenIndiana Bug Tracker

OpenIndiana Wiki

How does OpenIndiana compare to BSD or GNU/Linux?

IPS Guide (Image Packaging System Guide)

illumos project the OpenIndiana’s source tree

illumos Developer’s Guide

Does OpenIndiana provide a SPARC release?

 

Download:

Getting illumos Distributions

OpenIndiana Hipster 2016.04 Live DVD 64bit/i386

OpenIndiana Hipster 2016.04 Live USB 64bit/i386

OpenIndiana Hipster 2016.04 Text install CD 64bit/i386

OpenIndiana Hipster 2016.04 Text Install USB 64bit/i386

OpenIndiana Legacy Build 151a8 Desktop DVD 64bit/i386

OpenIndiana Legacy Build 151a8 Desktop USB 64bit/i386

OpenIndiana Legacy Build 151a8 Server CD 64bit/i386

OpenIndiana Legacy Build 151a8 Server USB 64bit/i386

OpenSolaris Build 134 Text Install SPARC

OpenIndiana Legacy Build 151a8 unofficial Text Install SPARC

 

Note: Hipster Branch = unstable branch and Legacy = stable branch.

 

Happy OpenIndiana  😀